Gold Member Since 2015
Audited Supplier
Hebei Eminent Chemical Technology Co., Ltd.

White Oil, White Oil 80%, White Oil 90% manufacturer / supplier in China, offering All Kinds of White Mineral Oil (petroleum) , CAS: 8012-95-1; 8042-47-5/White Oil, Gum Rosin Ww/ N Grade for Paper Making, Supply LABSA 96% with CAS 27176-87-0/LABSA 96%, Dodecyl Benzene Sulphonic Acid 96%, Good Raw Material of Detergent and so on.

(/ )

Supplier Homepage Product Others All Kinds of White Mineral Oil (petroleum) , CAS: 8012-95-1; 8042-47-5/White Oil

All Kinds of White Mineral Oil (petroleum) , CAS: 8012-95-1; 8042-47-5/White Oil

Purchase Qty.:
(Tons)
1-99 100+
FOB Unit Price: US $1,100 US $1,000
Purchase Qty. (Tons) FOB Unit Price
1-99 US $1,100
100+ US $1,000
Get Latest Price
Production Capacity: 5000tons/Month
Transport Package: 25kg/Bag or According to Requirment
Payment Terms: L/C, T/T
Basic Info
  • Model NO.: industrial/cosmetic/food grade
  • Place of Origin: China (Mainland)
  • Purity: 75%-95%
  • pH Value: 7.0-9.0
  • Fluid Loss: ≤8.5ml
  • Adsorbent Variety: Other
  • Specification: SGS ISO
  • Name: Carboxymethyl Cellulose
  • Moisture %: ≤8.0
  • D.S.: ≥0.8
  • Apparent Viscosity MPa.S: ≤80
  • CAS No.: 9004-32-4
  • Trademark: emi
  • Origin: China
Product Description

Specifications
1.anionic polyacrylamide
2.for waste water, oil drilling, paper making ects
3. high charge stability
4.Sample available
1. Introduction:
Anionic polyacrylamide is a water-soluble synthetic polymer, which has the properties of flocculation, thickening, shear, resistance reducing and dispersion.
2.Catalogue of anionic polyacrylamide:
 

Model

Appearance

Molecular weight(10,000)

Solid content (%)

Insoluble matter(%)

Degree of hydrolysis(%)

Risidual monomer(%)

NX-A5-A22

White granule

5---2200

≥90

≤0.2

13%---45%

≤0.05

 
3.Application:
1). Materials used for drilling mud additives, can reducethe friction of the drill bit to extend the service life of drill bits to improvethe penetration rate and the footage, reduce the time for drilling the plug, the collapse of effective anti-wells, in addition to thickening the water used in flooding, fracturing fluid and selective water shutoff, for Enhanced Oil Recovery Significant Effect;

2). In the mining, coal mining industry can be used for waste water, coal washing waste water clarifier.
3). Used for municipal sewage sludge, municipal solid waste and industrial effluent;

4). Paper-making industry for the clarification of liquid caustic soda, fiber dispersing agent, can improve the beating, the filler retention agents, paper strengthening agent, can be used to improve the treatment rate and the white water recovery;

5). Used in Textile, CarpetIndustry, Sizing, Quick-setting Cement,Synthetic Resin Coating. Photosensitive Polymers, Adhesives, Dispersing Agent, as well as Agricultural Soil Gel, Slurry Stabilizers, Soil Amendments;

6). Oil field water treatment to deal with the recovery of oil.

4.According to the properties of product, the followings should be noticed during the process of preparation and usage.

1. The concentration shouldn't be too high, normally between 0.05%-0.5%.
2. During the process of dissolving the product, stir slowly while adding the product slowly to half-water-filled tank, this can help the product disperse rapidly. Addition of product without stirring the mixture, or addition of water after product into the tank is forbidden to avoid the formation of big chunk, which is difficult to dissolve.
3. Water used to prepare solution should be neutral. Normally, tap water is fine in this process, no specific requirement.
4. The speed of stirring or agitation should be in a proper range. Relatively slow speed can cause increase of dissolution time and low level of dispersion; In contrast, too furious speed can break the linear chain, consequently, damaging the relevant properties of the product.
5. Normally, the product can be dissolved in water at room temperature, with no heating needed. In cold weather like winter, the solution temperature can be raised up to 30-40 to increase dissolution speed, but should not exceed 60 to avoid degradation of the product.
6. Low concentration of product solution should be prepared freshly for use and the storage time can not exceed 24h, otherwise, the quality of the product could degrade.
7. Formation of two layers for the emulsion after long time of storage does not affect the quality of the product and the emulsion can still be used after stirring to form homogenous phase.
Send your message to this supplier
Avatar
Mr. Jack
*From:
To: Mr. Jack
*Message:

Enter between 20 to 4,000 characters.

This is not what you are looking for? Post a Sourcing Request Now

Find Similar Products By Category